ONDUTISS® FACADE

Three layer highly air permeable and breathable housewrap (100gsm) | 2.7m x 100m

ONDUTISS® FACADE

ONDUTISS® FACADE: this 3-layer high vapour permeable house wrap designed for all wall constructions, including timber, metal, and concrete, is a highly breathable housewrap, ideal for timber, concrete and steel framed constructions.

ONDUTISS® FAÇADE breathable membrane for walls preserves the waterproofing of a buildings walls. The three-layer high-permeable waterproof house wraps meet the highest quality parameters with regard tear resistance and stretchability.

ONDUTISS® FAÇADE housewraps are produced using functional films, secured from both sides with polypropylene non-woven vlies, ensuring the highest level of waterproofing performance.

Colours
Contact Us
DESCRIPTION
Product benefits
High vapour permeability
Windtight & water resistant
High UV resistance
Minimises heat loss through the walls
Protects thermal insulation from damp
Produced in economical jumbo rolls, 2.7m x 100m
Flexibility
Lightness
Waterproof
Ease of installation
ONDUTISS FACADE: HIGH PERFORMANCE WALL WRAPS

ONDUTISS® FACADE : HIGH-PERFORMANCE WALL WRAPS

Discover ONDUTISS® FACADE wall membranes: waterproof, lightweight and effective products with great performance.

ONDUTISS® FACADE membranes consist of a layer of polypropylene between two sheets of non-woven polypropylene, making them vapour permeable. This guarantees a breathable wall membrane that protects and insulates against humidity, wind and condensation.

ONDUTISS® FAÇADE wall wraps can be installed in many types of wall constructions in both new-build construction and renovations for houses, leisure buildings, timber buildings: garden sheds and summer houses, animal shelters and stables, and other outbuildings.

Supplied in roll form, in aesthetically pleasing anthracite grey, ONDUTISS® FACADE is easy to install. Follow our installation instructions found in the TDS below for efficient use.

APPLICATIONS
ONDUTISS® FACADE 100
ONDUTISS® FACADE 100
INSTALLATION AND DOCUMENTATION
Installation advice

The facade membrane (wall wrap) is fixed horizontally (from bottom to top) with inscriptions on the outside.
Tension the membrane lightly and fix to the structure with staples or wide head nails (roofing nails).
Fix the next air barrier strips with a suitable overlap, which is printed on the membrane.
The vertical overlap must be at least 30 cm.
In order to eliminate air flow in the wall, it is required to bond the air barrier overlaps with double-sided tape (e.g. ONDUTISS® DUO MIX) or single-sided tape (e.g. ONDUTISS® UNO MIX) or adhesive strips integrated into the membrane (TT version available upon request).

INSTALLATION STEPS
Documentation