Faq
- Can I walk on an ONDULINE or ONDUVILLA roof?
- What kind of fixing, screw or nail can I use?
- How many sheets are needed to cover a roof?
- What kind of structure do I need for a ONDULINE or ONDUVILLA roof?
- Where can I find Onduline installation instructions?
- Where can I find the Installation Guide?
- What is the ridge angle?
- What is the maximum spacing between battens?
- What is the maximum recommended span for ONDUCLAIR products?
- Why should the roof be ventilated?
- What is the overhang required for ONDULINE sheets?
- What are the main tips to properly install BARDOLINE Shingles?
- How can ONDUVILLA be installed on wood batten?
- How many nails should I use per ONDULINE sheet?
- How can I install a gutter to an ONDULINE or ONDUVILLA roof?
- How can I cut an ONDULINE sheet?
- How many nails should I use per ONDUVILLA tile?
- How do you cut an ONDUVILLA tile?
- What is the minimum roof pitch for ONDULINE sheets?
- Can I install solar panels on an Onduline roof?
How many nails should I use per ONDUVILLA tile?
We recommend you allow 5 fasteners per tile, screws or nails.
Remember to allow additional fixings for the ridge unit which must be nailed at every corrugation. Nails are available in boxes of 400, or 50 nail packs.We recommend you allow 5 fasteners per tile, screws or nails.
![](https://uk.onduline.com/sites/onduline_uk/files/styles/780w/public/2018-12/onv-fiorentino-restaurant-03-aravaca-madrid-es-2013_3.jpg?itok=JGPoDFyF)
Do you need more details ?
Did you find what you were looking for?