Faq
- How does ISOLINE® LOW LINE function?
- What are the main types of roof structures that ISOLINE® LOW LINE can be installed on?
- What is the required penetration depth for fixings?
- Where exactly should the fixings penetrate the ISOLINE® sheets?
- Can I use a breathable membrane in conjunction with ISOLINE and a full deck?
- Will my tiles leak if installed at a low pitch?
- Do I need to install counter-battens on a full deck roof to ensure proper ventilation beneath the ISOLINE system?
- Will the ISOLINE sheet leak where fixings penetrate it?
- What is the minimum roof pitch ISOLINE® LOW LINE is accredited for?
- Do I need to keep to the original tiling gauge when installing tiles on top of an ISOLINE roof?
- Can I use PV / Solar Panels in an ISOLINE roof?
- Heritage Specific: Is ISOLINE LOW LINE safe for Bats?
- What is the minimum and maximum pitch for ISOLINE?
- Can I use ISOLINE on a vertical wall or as cladding?
- Do I need Fire Barriers with ISOLINE?
- Is ISOLINE breathable?
- How do the ISOLINE® LOW LINE sheets overlap?
- How much weight can ISOLINE LOW LINE take on top?
- What is the maximum tiling gauge that can be used?
- Can I install a Roof Window with ISOLINE?
- Are there specific ventilation requirements for this system?
- How long can ISOLINE LOW LINE be left exposed without a tile covering?
- How should contractors walk on the roof during installation?
- Do you need to use a Breathable Membrane in conjunction with ISOLINE LOW LINE?
- What precautions should be taken when installing roof tiles below the manufacturer's minimum recommended pitch?
- Can ISOLINE® LOW LINE sheets be used as a structural component when fixing solar panels?
- Where does the flashing sit? above or below the isoline sheet?
Can I install a Roof Window with ISOLINE?
Yes, in most cases it is possible to integrate a roof window with ISOLINE LOW LINE as the sub-roof. There are several types of roof windows on the market (fixed skylight, openable, conservation, low pitch etc.).
Exact detailing will depend on the roof window type. Different manufacturers may have varying details for each window type, including a range of flashings. Please contact your roof window manufacturer for specific models to check compatibility. Design integration is done by others. This will typically be a roof designer, an architect or specialist roofing contractor.
Do you need more details ?
Did you find what you were looking for?