Faq
- What is the warranty on INNOLINE?
- Do I need specialised tools to install INNOLINE?
- Do I really not have to cut the sheets?
- What type of base deck does INNOLINE require?
- What is the minimum roof pitch required for INNOLINE?
- How many screws do I need per INNOLINE sheet?
- Where exactly should I screw into the sheet?
- My roof is not an exact multiple of the sheet size. What should I do?
- How much overhang should I leave at the edge?
- Can INNOLINE be installed on battens?
- How should you fix the ridges and verges?
- Can I reduce waste if my roof dimensions do not perfectly match the sheet size?
- What colours are available for INNOLINE?
- Can I cut INNOLINE sheets?
- Are there matching accessories available for each colour?
- Can I walk on an INNOLINE roof?
- What are the measurements of the overlaps for each sheet of INNOLINE?
- What is INNOLINE?
- What is INNOLINE made from?
- What kind of buildings is INNOLINE® suitable for?
- What is "Compact Core Technology"?
- What are the dimensions and weight of a single INNOLINE sheet?
Can I walk on an INNOLINE roof?
During installation or maintenance, always follow the installation instructions and step only where the roof structure provides adequate support.
Avoid unnecessary foot traffic once the roof has been completed.
Only walk on the roof if this is necessary. To distribute the load, planks or ladder should be laid flat to carry out maintenance and related work. All precautions should be taken and safety regulations must be observed and applied.
Do you need more details ?
Looking for something else?